How a Wire Straightener Adjusts Wire Straightness

A straightener is equipment that straightens rebar, iron wire, and similar materials. Typical straightening practices to note:

[yx_embed_post ids=1]

1. Select suitable straightening blocks and drive speed: based on material diameter, choose appropriate straightening blocks and pull-wheel grooves, and set the drive speed.

2. Adjust the straightening blocks: the barrel usually has multiple blocks; blocks 1 and 5 should sit on the centerline, while others may be offset. Through trial adjustment, first offset the rebar by a small amount, then increase gradually until straightening is achieved.

3. Check cut length: after cutting three or four bars, stop and check length. If there is error, adjust the limit switch or fixed-length plate until correct.

4. Safety notes: do not feed rebar before straightening blocks are fixed and the guard is closed, or flying blocks may injure people after start-up. Do not stack items on the machine, as vibration may drop objects into the mechanism.

These are general methods; exact steps vary by model and maker. Always follow the operation manual and work safely.

Regular inspection and maintenance: periodically check electrical wiring and component connections for reliability, and that transmission parts move freely. Keep the machine clean and perform necessary lubrication and upkeep.