2D Flat Wire Bender Overview: How to Adjust Pressure-Wheel Wire Feed

Internal structure

Technical parameters 1. Power supply: 380 V (three-phase five-wire) 2. Rated power: 4.5 kW 3. Max cut iron wire diameter: φ8 4. Bending iron wire diameter range: φ2–6, 3–8 5. Overall bending accuracy: ±0.5 6. Efficiency: 15 pcs/min (approx. 300 length, single-angle bend) 7. Overall dimensions: 2500×750×1500 8. Net weight: 450 kg

1. Determine bend-head size and position according to the shape. For a U-shape with a radius, the inner die must support the bend — choose a suitable inner forming die.

2. Straighten the wire (as shown above): load the wire into the straightener blocks and advance it into the feed rollers.

3. Exit through the bottom knife hole, then turn the handwheel to feed outward. Check wire straightness and adjust the straightener rollers (as shown) until the wire is straight. 4. Wire bend flatness and twist can be controlled by adjusting pressure-wheel height.